Boxe Auto JBL C608GTi CLASSIC 160 mm 2-way High Performance
- Boxe auto - JBL C608GTi CLASSIC 160 mm 2-way High Performance
Cod Produs: C608GTi CLASSIC
Component System auto JBL C608GTi CLASSIC
Pret/pereche
160 mm 2-way High Performance Component System Master Carton 2.
6-1/2" (160mm) 2-Way Component Speaker System
The woofer cone developed for the C608GTi MKII is anodized aluminum. This material moves the first-modal cone-body breakup to a high frequency outside the operating band, significantly reducing distortion and maximizing midrange clarity.
An optimized nitrobutylene (NBR) low-loss surround material is used to damp cone breakup modes.
A 2" aluminum edge-wound voice coil is used. Using this ribbon-shaped aluminum wire allows us to precisely specify the number of windings in the magnetic gap optimizing motor force for high efficiency and low distortion.
The tweeter featured in the C608GTi MKII system uses a pure titanium dome suspended by a rubber surround to optimize output and reduce distortions that travel along the tweeter's dome.
The C608GTi MKII utilizes an outboard crossover with a 3500Hz fouth-order Linkwitz-Riley acoustic alignment. Air-core inductors are used to reduce magnetic saturation under high-power conditions and polypropylene capacitors ensure near ideal characteristics with low equivelent series resistance (ESR). The crossover also features impedance compensation and a tweeter protection circuit. Tweeter level may be adjusted for flat response +2dB or -2dB.
The C608GTi MKII midrange/woofer cone also features Plus One (patent pending) technology, which provides up to 30% more cone area than competing speakers of the same size. Speaker with Plus One deliver higher efficiency and more bass output.
The Tweeter in the C608GTi MKII component system features the I-Mount (patent no. 5,859,9170) tweeter-mounting system. This system facilitates easy and versatile tweeter installation (surface, flush, or flush angled).
General
Power Handling, RMS 150 Watts
Power Handling, Peak 600 Watts
Frequency Response (±3dB) 50Hz - 21kHz
Sensitivity (2.83V @ 1m) 89dB
Impedance 4 Ohms
Crossover Frequency(ies) 3.5kHz, 24dB/oct
Mounting Depth 2-11/16" Woofer, 1-1/8" Tweeter
Caracteristici
tehnice
Informatiile si imaginile prezentate mai sus sunt orientative si sunt conforme cu cele puse la dispozitia neomax.ro de catre furnizorii, producatorii sau reprezentantii produselor. Rareori informatiile prezentate contin erori sau inadvertente. Va multumim pentru intelegere si pentru identificarea acestora.
